News

Location:Home > News

Different types of magnets maintenance should follow changes in specific working environment

Oil filter magnet in a magnet, the magnet is mainly used for filtering impurities in the fuel tank after tank installation of such a magnet, it usually does not have to check the work, usually every ten days or fifteen days should take the overall framework , and then use a clean cloth to clean the shelves, and then placed in the tank to continue to use, depending on the time to determine the cleaning tank if the tank relatively clean time can be extended. 
Because oil does not exceed ten microns difficult to remove iron impurities, particularly for steam turbine power plant turbine inside the tank, containing phosphate and oil fuel supply system, oil mill also the iron phosphate granules contain impurities which may be through a multi-level oil in the bearing of network-control systems, and bearing wear, the control system run blocking, journal and bearing wear and impurities also make the oil will gradually deepening will form a vicious cycle, the machine is likely to cause significant accident. 
These machines can be utilized for the NdFeB permanent magnet materials companies, can be very effectively filter out these tiny impurities, to prevent accidents.

Go Back 】 | 【 Print 】 | 【 Close this window